The leading Swedish hydrodemolition equipment manufacturer Conjet AB will use Bauma 2007 for the world launch of the latest model in its well renowned 360 range the Conjet Robot 364 MPA.
T
he Conjet Robot 364 MPA, on display in Hall A1 stand A1:215, can remove concrete from numerous surfaces, including above and underneath the robot with a minimal set up time. Due to its rigid designed and improved multipurpose arm, which reaches up to 6m above the robot and 5m to the side, the new Robot 364 MPA can operate with a reaction force up to 2000N, which is equivalent to the force of a water jet generated by a 550kW (700 HP) high-pressure water pump.
The new features on the Robot 364 MPA include hydraulically height adjustable steering wheels that add an additional degree of freedom for positioning the feedbeam with its integral jetting lance and individually hydraulically extendable drive wheels to optimize robot stability. In addition the design of the new multipurpose arm offer higher accuracy in positioning and holding the feedbeam.
The closed loop control system features the latest state of the art PLC (micro computer) and a new control box controlling the hydrodemolition process. There are nine pre-loaded programs for the most common hydrodemolition tasks and in addition the operators can store up to eleven programs with their own set up parameters. Two level cut and accelerated lance turning are other features included in the system.
For safety reasons, when the robot is supplied with high-pressure water from a Conjet Powerpack the robot and powerpack control systems are normally integrated. This enables the powerpack to speed up when the robot is switched into automatic mode and returns to idle when it is stopped. Should the emergency stop be activated on either the robot or the powerpack both systems shut down immediately.
The Robot 364 is electrically powered so that it can be operated in tunnels and parking garages without producing any exhaust gases that are hazardous for the operators.
For further information please contact:
| Lars Göran Nilsson |
| Conjet AB |
| P.O. Box 507 |
| S-136 25 Haninge |
| Sweden. |
| Tel: +46-(0)8-5565-2240 |
| Fax: +46-(0)8-5565-2260 |
| E-mail: conjet@conjet.com |
| Web: www.conjet.com |
For more information on Conjet AB and their Hydrodemolition Robot visit their company profile page